Installing The Middle Drive Shaft - Yamaha 2016 Grizzly yfm700gplg Service Manual

ECB01770
NOTICE
The middle driven pinion gear bearing retain-
er has left-hand threads. To tighten the re-
tainer turn it counterclockwise.
1
▲ ▲▲▲ ▲ ▲▲▲ ▲ ▲ ▲▲▲ ▲
3. Install:
• Middle driven pinion gear shim(s) "1"
• Bearing housing "2"
TIP
• Install the shim(s) so that the tabs are posi-
tioned as shown in the illustration.
• Make sure that the arrow "a" on the bearing
housing points upward.
1
4. Install:
• Rear drive shaft yoke "1"
• Washer
• Rear drive shaft yoke nut "2"
Rear drive shaft coupling gear
nut (middle gear side)
150 Nm (15 m·kgf, 108 ft·lbf)
LOCTITE®
TIP
Use the coupling gear/middle shaft tool "3" to
hold the rear drive shaft coupling gear.
Coupling gear/middle shaft tool
90890-01229
Gear holder
YM-01229
2
▲ ▲▲▲ ▲ ▲ ▲▲▲ ▲ ▲ ▲▲▲ ▲
a
1
2
5. Install:
• Front drive shaft coupling gear "1"
• Washer
• Front drive shaft coupling gear nut "2"
▲▲▲
TIP
Use the coupling gear/middle shaft tool "3" to
hold the front drive shaft coupling gear.
EBS30208

INSTALLING THE MIDDLE DRIVE SHAFT

1. Install:
• Circlip
• Middle driven gear "1"
(onto the middle drive shaft "2")
5-87
MIDDLE GEAR
3
Front drive shaft coupling gear
nut (middle gear side)
115 Nm (11.5 m·kgf, 83 ft·lbf)
LOCTITE®
Coupling gear/middle shaft tool
90890-01229
Gear holder
YM-01229
Installed depth "a" of middle
driven gear
24.7–24.9 mm (0.972–0.980 in)
1
2
1
2
3