Yamaha 2016 Grizzly yfm700gplg Service Manual page 77

1. Throttle cable
2. Rear brake cable
3. Rear brake hose
4. Shift control cable
5. Front brake hose
6. Negative battery lead
7. Final drive case breather hose
8. Starter motor lead
9. Throttle body breather hose
10. Coolant temperature sensor lead
11. Wire harness
12. ISC unit lead
13. Rectifier/regulator lead
14. AC magneto lead
15. Fuel hose
16. Circuit breaker
17. Tail/brake light lead
18. Fuel pump lead
19. Intake air temperature sensor lead
20. TPS lead
21. Intake air pressure sensor lead
22. Fuel injector lead
A. Route the throttle cable between the air duct and
the frame.
B. Fasten the throttle body breather hose with the
holder.
C. Make sure that the fuel hose and fuel pump lead
are not pinched between the frame and the rear
fender.
2-46
CABLE ROUTING