Checking The Oil Cooler; Installing The Oil Cooler - Yamaha 2016 Grizzly yfm700gplg Service Manual

EBS30211

CHECKING THE OIL COOLER

1. Check:
• Oil cooler
Cracks/damage → Replace.
2. Check:
• Oil hose joint
• Oil pipe (crankcase)
• Oil pipe (AC magneto cover)
Cracks/damage/wear → Replace.
3. Check:
• Oil hose (crankcase to cylinder head)
Cracks/damage → Replace.
EBS30212

INSTALLING THE OIL COOLER

1. Install:
• Oil hose (crankcase to cylinder)
• Clamps
• Oil hose joint
• Gaskets
New
• Oil hose bolt (crankcase to cylinder)
Refer to "INSTALLING THE CYLINDER
HEAD" on page 5-26.
2. Clean:
• Mating surfaces of the oil cooler and the
crankcase
(with a cloth dampened with lacquer thinner)
3. Install:
• Gasket
New
• Oil cooler "1"
• Oil filter cartridge union bolt "2"
TIP
Make sure the projection "a" on the oil cooler
touches the projection "b" on the crankcase.
2
Oil filter cartridge union bolt
30 Nm (3.0 m·kgf, 22 ft·lbf)
4. Fill:
• Cooling system
(with the specified amount of the recom-
mended coolant)
a
b
1
Refer to "CHANGING THE COOLANT" on
page 3-29.
• Crankcase
(with the specified amount of the recom-
mended engine oil)
Refer to "CHANGING THE ENGINE OIL" on
page 3-24.
5. Check:
• Cooling system
Leaks → Repair or replace any faulty part.
6. Measure:
• Radiator cap opening pressure
Below the specified pressure → Replace the
radiator cap.
Refer to "CHECKING THE RADIATOR" on
page 6-6.
6-3
OIL COOLER