8. Check the start switch.
Refer to "CHECKING THE
SWITCHES" on page 9-81.
OK ↓
9. Check the rear brake light switch.
Refer to "CHECKING THE
SWITCHES" on page 9-81.
OK ↓
10.Check the gear position switch.
Refer to "CHECKING THE
SWITCHES" on page 9-81.
OK ↓
11.Check the entire starting system
wiring.
Refer to "CIRCUIT DIAGRAM" on
page 9-5.
OK ↓
Replace the ECU.
ELECTRIC STARTING SYSTEM
NG →
The start switch is faulty. Replace the han-
dlebar switch (left).
NG →
Replace the rear brake light switch.
NG →
Replace the gear position switch.
NG →
Properly connect or repair the starting sys-
tem wiring.
9-9