Installing The Engine - Yamaha 2016 Grizzly yfm700gplg Service Manual

EBS30351

INSTALLING THE ENGINE

1. Install:
• Rubber dampers (front side) "1"
• Engine mounting bolts (front) (M10) "2"
• Engine mounting bolts (front) (M6) "3"
• Engine "4"
• Rubber dampers (rear side) "5"
• Rubber damper nuts (rear side) "6"
• Engine mounting bolts (rear) (M10) "7"
• Engine mounting bolts (rear) (M6) "8"
• Rubber damper nuts (front side) "9"
ECB01630
NOTICE
Make sure that the engine does not strike the
brake pipe when installing it.
TIP
Do not fully tighten the bolts and nuts.
7
6
3
9
2
1
2. Tighten:
• Engine mounting bolts (front) (M10) "2"
• Engine mounting bolts (front) (M6) "3"
• Engine mounting bolts (rear) (M10) "7"
• Engine mounting bolts (rear) (M6) "8"
• Rubber damper nuts (front side) "9"
• Rubber damper nuts (rear side) "6"
8
5
4
5
8
7
1
2
3
ENGINE REMOVAL (3)
Engine mounting bolt (front)
(M10)
42 Nm (4.2 m·kgf, 30 ft·lbf)
Engine mounting bolt (front) (M6)
10 Nm (1.0 m·kgf, 7.2 ft·lbf)
LOCTITE®
Engine mounting bolt (rear) (M10)
42 Nm (4.2 m·kgf, 30 ft·lbf)
Engine mounting bolt (rear) (M6)
10 Nm (1.0 m·kgf, 7.2 ft·lbf)
LOCTITE®
Rubber damper nut (front side)
42 Nm (4.2 m·kgf, 30 ft·lbf)
Rubber damper nut (rear side)
42 Nm (4.2 m·kgf, 30 ft·lbf)
5-11