Adjusting The Headlight And Handle Mounted Light Beams - Yamaha 2016 Grizzly yfm700gplg Service Manual

1
2. Remove:
• Handle mounted light bulb cover "1"
1
3. Remove:
• Handle mounted light bulb holder "1"
• Handle mounted light bulb
EWB03940
WARNING
Since the handle mounted light bulb gets ex-
tremely hot, keep flammable products and
your hands away from the bulb until it has
cooled down.
TIP
Remove the handle mounted light bulb holder by
pushing it in and turning it counterclockwise, and
then remove the defective bulb.
1
4. Install:
• Handle mounted light bulb
Secure the new handle mounted light bulb
with the handle mounted light bulb holder.
2
1
New
3-35
PERIODIC MAINTENANCE
ECB02990
NOTICE
Avoid touching the glass part of the handle
mounted light bulb to keep it free from oil,
otherwise the transparency of the glass, the
life of the bulb and the luminous flux will be
adversely affected. If the handle mounted
light bulb gets soiled, thoroughly clean it
with a cloth moistened with alcohol or lac-
quer thinner.
5. Install:
• Handle mounted light bulb holder
TIP
Install the handle mounted light bulb holder by
pushing it in and turning it clockwise.
6. Install:
• Cover at the rear of the handle mounted light
7. Install:
• Handle mounted light cover "1"
• Quick fastener
EBS30594
ADJUSTING THE HEADLIGHT AND HANDLE
MOUNTED LIGHT BEAMS
1. Adjust:
• Headlight and handle mounted light beam
(vertically)
▼ ▼▼▼ ▼ ▼▼▼ ▼ ▼ ▼▼▼ ▼
a. Turn the adjusting screw "1" in direction "a" or
"b".
Direction "a"
Light beam is raised.
Direction "b"
Light beam is lowered.
▼ ▼▼▼ ▼ ▼ ▼▼▼ ▼ ▼ ▼▼▼ ▼
1
▼▼▼