Installing The Steering Stem (For Eps Models) - Yamaha 2016 Grizzly yfm700gplg Service Manual

• Steering stem bolts "12"
(temporarily tighten)
TIP
Apply lithium-soap-based grease to the steering
stem bushings.
5. Install:
• Steering stem bracket "13"
• Steering stem bracket bolts "14"
(temporarily tighten)
6. Tighten:
• Steering stem bolts "12"
Steering stem bolt
23 Nm (2.3 m·kgf, 17 ft·lbf)
TIP
• Bend the lock washer tabs "a" along a flat side
of the bolts.
• Pass the brake hoses through the cable guide.
Refer to "CABLE ROUTING" on page 2-33.
a
7. Tighten:
• Steering stem support bolts "5"
Steering stem support bolt (ex-
cept for EPS models)
34 Nm (3.4 m·kgf, 25 ft·lbf)
LOCTITE®
8. Tighten:
• Steering stem bracket bolts "14"
Steering stem bracket bolt
51 Nm (5.1 m·kgf, 37 ft·lbf)
LOCTITE®
a
TIP
TIP
4-58
STEERING STEM
EBS30398
INSTALLING THE STEERING STEM (for EPS
models)
10
New
5
3
4
7
8
1. Install:
• Collars "1"
• Steering stem bushings "2"
• Steering stem bushing holders "3"
• Cable guide "4"
• Lock washer "5"
New
• Steering stem bracket "6"
• Steering stem bolts "7"
(temporarily tighten)
Apply lithium-soap-based grease to the steering
stem bushings.
2. Install:
• EPS unit "8"
• EPS unit bolts "9"
(temporarily tighten)
3. Install:
• Steering stem "10"
• Steering stem pinch bolt "11"
(temporarily tighten)
Align the punch mark "a" on the EPS unit with
the groove "b" in the steering stem.
6
1 2 3
2
11
9
(4)
12