Tadiran Telecom Emerald ICE Quick Installation Manual page 10

Section 1-Introduction
The Emerald ICE incorporates state-of-the-art digital technology for voice switching and call pro-
cessing utilizing Pulse Code Modulation and Time Division Multiplexing (PCM/TDM).
The Emerald ICE is a non-blocking switch featuring no degradation of voice signals. The system
utilizes a 16-bit, 20 MHz main microprocessor and peripheral device (extensions and CO lines)
processors in a distributed processing configuration. Memory consists of 640K bytes of ROM and
384K bytes of RAM.
The Emerald ICE is shipped as follows:
1-KSU with the following:
• Ten (10) digital extension ports.
• Two (2) analog device ports.
• Six (6) CID ready CO Line ports.
• Two music source enters (can be assigned as desired to CO lines for hold music/mes-
sages.
• One power failure port (CO Line 1).
• One control contact (LBC, Gate, External Page Control).
• One external paging equipment interface.
• Two serial ports.
• PC-RMP Programming Interface.
• SMDR (Station Message Detailed Recording).
About this Manual
The Emerald ICE Quick Installation Guide is divided into the following sections:
• Section 1 - Introduction - this section provides a general description of the Emerald ICE
system as well as a description of the manual contents, associated documentation, and a
listing of the document conventions.
• Section 2 - System Design - This section provides descriptions of the individual compo-
nents of the Emerald ICE system.
• Section 3 - Basic Programming - This section provides basic instructions for accessing
the Emerald ICE programming database using both a Deluxe Model Telephone and the
RMP PC application.
• Section 4 -Programming Quick-Reference Charts - This section provides quick refer-
ence charts for all of the Deluxe Telephone programming.
Page 1-2