Page 1
Tadiran EXP40 User Guide Aeonix Version 2.5 Document Edition 1.0...
Page 2
No parts of this publication may be subject to alteration, modification or commercial use. Tadiran Telecom (TTL), L.P . will not be liable for any damages arising from use of an illegally modified or altered publication.
Page 3
WEEE separately. GNU GPL Information Tadiran EXP40 firmware contains third-party software under the GNU General Public License (GPL). Tadiran uses software under the specific terms of the GPL. Please refer to the GPL for the exact terms and conditions...
About This Guide About This Guide Thank you for choosing the EXP40 Expansion Module This guide provides everything you need to quickly use your new EXP40 Expansion Module For programming advanced features on your , such as assigning EXP40 Expansion Module...
Table of Contents Table of Contents About This Guide ..............iv Table of Contents ..............v Getting Started ................. 1 Packaging Contents ......................1 Physical Features........................2 Installation ..........................3...
Getting Started Getting Started This chapter provides basic installation instructions and information for obtaining the best performance with the EXP40 expansion module. The topics include: Packaging Contents Physical Features Installation Packaging Contents The following items are included in your package: Expansion Module ...
Screw Check the list before installation. If you find anything missing, contact your reseller. Physical Features The main physical features of the EXP40 expansion module are described in the following table: Item Description 320 x 160 pixel Hard keys...
Getting Started Installation The EXP40 expansion module applies to SIP-T46G IP phone. To easily connect the EXP40 to the phone, please unplug the phone stand from the T46G IP phone. To unplug the stand from the T46G IP phone: Unplug the power adapter and Ethernet cable from the IP phone.
Page 10
Tadiran EXP40 User Guide Connect the Ext jack of the IP phone and the Ext in jack of the expansion module using one supplied cord. If you connect two expansion modules, connect the Ext out jack of the previous expansion module and the Ext in jack of the second expansion module using another supplied cord.
Need help?
Do you have a question about the EXP40 and is the answer not in the manual?
Questions and answers