Coolant Level Inspection; Coolant Replacement - Yamaha YQ50 Service Manual

COOLANT LEVEL INSPECTION/

COOLANT REPLACEMENT

3-17
COOLANT LEVEL INSPECTION
NOTE:
Install the scooter straight up when inspecting
the coolant level.
1.Place the scooter on a level surface.
NOTE:
Place the scooter on its centerstand.
2.Remove:
• Front cover
Refer to the section "COVER"
3.Inspect:
• Coolant level
Coolant level should be between maximum
and minimum marks.
Coolant level low → Add recommanded coolant
to proper level.
CAUTION:
Hard water or salt water is harmful to the
engine parts; use boiled or distilled water if
you can't get soft water.
4.Install:
• Front cover
Refer to the section "COVER"
COOLANT REPLACEMENT
1.Remove:
• Front cover
Refer to the section "COVER"
• Radiator cap
WARNING
Do not remove the radiator cap when the
engine and radiator are hot. Scalping hot
fluid and steam may be blown out under
pressure, which could cause serious injury.
When the engine has cooled, open the
radiator cap by followingthis procedure:
Place a thick rag or a towel over the radiator
cap. Slowly rotate the cap counterclockwise
INSP
ADJ