Removal; Inspection; Assembly - Yamaha YQ50 Service Manual

REAR WHEEL
WARNING
• Disc brake components rarely require
disassembly.
components unless absolutely necessary. If
any hydraulic connection is disconnected,
the entire system must be disassembled,
drained, cleaned, and then properly filled
and bled after reassembly. Do not use
solvents on internal brake component.
• Solvents will cause seals to swell and
distort. Use only clean brake fluid for
cleaning. Use care with brake fluid. Never
allow brake fluid to come in contact with the
eyes. Brake fluid can damage painted surfa-
ces and plastic parts.

REMOVAL

1. Remove:
• Muffler assembly
• Rear wheel fixing bolts
• Rear wheel

INSPECTION

1. Check :
• Rear wheel
Refer to the section "FRONT WHEEL ".
2.Measure :
• Wheel runout
Refer to the section "FRONT WHEEL ".
Rim runout limits :
Radial : 1.0 mm (0.039in)
Lateral : 1.0 mm (0.039 in)
7-15
CHAS
Do not disassemble