ENGINE ASSEMBLY AND ADJUSTMENT
314006
AUTOLUBE PUMP
1. Install :
• Circlip Q
• Pin W
• Pump drive gear E
• Circlip R
314004
2. Apply :
• Lithium soap base grease
(to O-ring )
3. Install :
• Autolube pump
314005
4. Apply :
• Lithium soap base grease
(to autolube pump gear)
CDI MAGNETO
1. Install :
• Gasket
2. Apply :
• Lithium soap base grease
(to oil seal Q)
321001
3.Pass the CDI magneto lead through the
crankcase hole.
4. Install :
• Stator assembly
4-24
ENG
Screw (autolube pump) :
4 Nm (0.4 m.kg)
Lithium soap base grease :
15 cc (0.92 cu.in)
Screw (stator assembly) :
8,5 Nm (0.85 m.kg)