Assembly And Installation - Yamaha YQ50 Service Manual

STEERING HEAD AND HANDLEBAR
354008
354009
354010
354003
CAUTION:
• Unless installed correctly, the bearing races
will damage the frame.
• Never hit the bearing races on the ball race
surface.
*********************************************************
4. Check :
• Steering shaft
Bend/Damage © Replace.
WARNING
Never attempt to straighten a bent steering
shaft.

ASSEMBLY AND INSTALLATION

Reverse the "REMOVAL" and "DISASSEMBLY"
procedure.
Note the following points.
WARNING
Proper cable and hose routing is essential
to insure safe scooter operation. Refer to
section "CABLE ROUTING" in Chapter 3.
1. Install :
• Bearing balls
2. Apply :
• Bearing grease (onto upper and lower bearing
balls)
3. Install :
• Steering shaft
• Bearing race (upper) Q
Ring nut wrench :
9079Q-02218
7-25
CHAS