FRONT WHEEL
INSTALLATION
Reverse the "Removal" procedure.
Note the following points.
1.Lubricate :
• Front wheel axle
• Bearings
• Oil seal (lips)
• Drive/driven gear (speedometer)
Recommended lubricant :
2. Install :
• Speedometer gear unit Q
NOTE:
Be sure that the two projections at the gear unit
mesh with the two slots on the wheel hub.
340004
3. Install :
• Front wheel Q
• Front caliper W
NOTE:
Be sure that the slot (torque stopper) of the gear
unit housing is positioned correctly.
346005
4.Tighten :
• Front wheel axle
• Front caliper mounting bolts
Apply Loctite
Front wheel axle :
Front caliper mounting bolts :
WARNING
Make sure that the brake hoses are routed
properly.
7-3
CHAS
Lithium soap base grease
LOCTITE®
35 Nm (3.5 m.kg)
23 Nm (2.3 m.kg)