Wheel Inspection; Cable Inspection And Lubrication - Yamaha YQ50 Service Manual

TIRE INSPECTION/WHEEL INSPECTION/

CABLE INSPECTION AND LUBRICATION

2 Inspect :
• Tire surface
Wear/Damage/Cracks/Road hazards ©
Replace.
• Aluminum wheels
Damage/Bends © Replace.
Never attempt even small repairs to the wheel.
WARNING
Ride conservatively after installing a tire to
allow it to seat itself properly on the rim.
• If the tire is removed with a tire lever, use a
suitable protection to prevent damaging the rim.
• When installing the tire, make sure the arrow
points to the front.
3.Measure :
• Tire tread depth
Out of specification © Replace.
Minimum tire tread depth
(front and rear) :
0,8 mm (0.03 in)
Q Tread depth
W Side wall
E Wear indicator

WHEEL INSPECTION

1.Inspect :
• Wheels
Damage/Bends © Replace.
WARNING
Never attempt even small repairs to the wheel.
CABLE INSPECTION AND LUBRICATION
WARNING
A damaged cable sheath will rapidly corrode.
As a result, the cable cannot move smoothly
inside the sheath. Since this situation is
dangerous, replace a damaged cable
immediately.
1. Check :
• Cable sheath
• Cable end
Damage © Replace.
3-25
INSP
ADJ