Caliper Disassembly - Yamaha YQ50 Service Manual

FRONT BRAKE
4. Install :
• Brake pads
• Pad spring
• Axle
• Pin
NOTE :
Be careful to install the brake pads correctly.
5.Lubricate :
• Mounting bolt (caliper body)
Recommended lubricant :
6.Install :
• Wheel axle
• Mounting bolt (front caliper)
Apply LOCTITE
Wheel axle :
Mounting bolt :

CALIPER DISASSEMBLY

NOTE:
Before disassembling the front brake caliper,
drain all brake fluid from the brake hose, master
cylinder, brake caliper and tank.
1.Remove:
• Union bolt Q
• Copper washers W
346005
NOTE:
Place the open end of the drain hose into a
container and pump out the remaining brake
fluid carefully.
2.Remove:
• Caliper body
• Caliper bracket
3. Remove :
• Piston
• Piston seals Q
347004
7-7
CHAS
Lithium soap base grease
LOCTITE ®
35 Nm (3.5 m.kg)
21 Nm (2.1 m.kg)