Engine Remounting - Yamaha YQ50 Service Manual

ENGINE ASSEMBLY AND ADJUSTEMENT
8. Install :
• Oil hose
• Oil delivery hose

ENGINE REMOUNTING

Reverse the removal procedure.
Note the following points.
1. Install :
• Engine mounting bolt 2
• Rear shock absorber bolt 1 (lower)
These bolts should be temporarily secured.
2. Tighten :
• Engine mounting bolt
• Rear shock absorber bolt (lower)
Engine mounting bolt :
Rear shock absorber bolt (lower) :
3. Install :
• Carburetor top together with throttle valve Q
• Fuel hose W/Vacuum hose E
• Brake cable/plug cap
4. Connect:
• Water hoses
NOTE:
When installing the throttle valve into the
322032
carburetor, align the groove of the throttle valve
with the projection of the carburetor.
5. Connect :
• Starter motor
• CDI magneto lead
• Earth
6. Install:
• Rear wheel collar assembly
NOTE:
Make sure the splines on the wheel hub fit onto
the rear drive axle.
7. Tighten :
• Rear wheel axle nut Q
NOTE:
When tightening the rear wheel axle nut, apply
the rear brake.
4-39
ENG
50 Nm (5.0 m.kg)
16 Nm (1.6 m.kg)