Removal - Yamaha YQ50 Service Manual

FRONT FORK

REMOVAL

WARNING
Securely support the scooter with a stand
under the engine.
1. Place the scooter on an even surface.
2. Disconnect :
• Speedometer cable
3. Remove :
• Front wheel
Refer to section "FRONT WHEEL" in Chapter 7.
4. Remove :
• Front fender
Refer to section "COVERS - REMOVAL AND
INSTALLATION" in Chapter 3.
5. Remove :
• Steering head
Refer to section "STEERING HEAD AND
HANDLEBAR" in Chapter 7.
6. Remove :
• Nut Q
• Washer W
• Ring nut E
NOTE:
• Loosen the ring nut with the ring nut wrench R.
Ring nut wrench :
354003
• Support the steering shaft to prevent it from
falling.
7. Remove :
• Front fork assembly
• Bearing balls
342001
8. Remove :
• Circlip Q
9. Loosen :
• Pinch bolt W
10. Remove :
• Fork leg (complete)
342001
7-18
CHAS
9079Q-02218