Rear Panel; Remote Control - Strong SRT 8215 User Manual

4. Standby/ON button
5. USB

2.3 Rear Panel

1. ANT IN
2. ETHERNET
3. HDMI
4. AUDIO output
5. TV SCART
6. Power entree 12Volt

2.4 Remote control

1. q
2. !
3. 0~9
4. FAV
5. 9
6. INFO
7. EPG
8. pq
9. t u
10. OK
11. MENU
12. 
13. 2
14. 5 6
15. 4
16. u
17. 78
18. 3
19. COLOUR BUTTONS
Double function for colour buttons:
20. SUB (red)
21. TXT (green)
22. AUDIO (yellow) Shows list of Audiotracks, for the current channel.
23. LIST (blue)
* Subtitles, Videotext, EPG (Electronic Programme Guide), and Audio languages are depending on availability in the specific broadcast
Switches the receiver ON or into Standby
To connect your USB storage device.
To connect to your antenna for reception of broadcast signals.
To connect to your Ethernet cable (RJ-45) for RSS feeds and weather forecasts
To connect your receiver with your TV-set using an HDMI cable. (recommend)
to able to watch in HD quality.
To connect your receiver to analogue amplifier set, AV receiver. Using a Jack
stereo to 2 x RCA
To connect your receiver with your TV-set using a SCART cable.
To connect to the power adaptor (100 - 240 V AC ~ 50/60 Hz to 12volt DC/1
Amp)
Switches the receiver On/Standby.
Mutes all audio outputs of the receiver
Enter channel number in TV mode or value input in menu
Opens the favourite group selection.
One step back in menu or back to previous channel.
Opens the current channel information; 2x opens technical signal information
Opens the EPG* (Electronic Programme Guide) in TV mode.
Change channel to next/previous. Menu: Moves the cursor up/down.
Decreases/increases the volume level. Menu: Change settings for specific
menus.
Opens the current channel list, in menu: for confirmation
Opens the main menu, in a menu you will get one step back.
Exits from the menu or sub-menu.
Press to pause playback
Fast rewind/fast forward.
Starts recording of the currently watched programme (* Not available for
Italy)
Press to continue playback.
Jump function in multimedia playback
Stop playback.
In different menus for specific functions e.g. Teletext and Editing.
Shows list of subtitled languages, for the current channel.
Shows Teletext on screen.
Opens the current channel list.
Fig. 2
Fig.3
5