Technical Specifications - Strong SRT 8205 User Manual

The receiver switches
o automatically.
Playback of video (or
Timeshift) is causing
picture freeze/macro
blocks or similar
distortion, especially on
HD content.

9.0 TECHNICAL SPECIFICATIONS

Demodulator
Demodulator:
Transmission mode:
Guard intervals:
Video Decoder
Pro le level:
Video resolutions:
Decoding & Video out:
Aspect ratio:
Audio Decoder
Audio support:
Sampling rate:
Audio mode:
Tuner
Front End:
Antenna power:
Input frequency range:
Input signal level:
Memory and System
Flash memory:
SDRAM:
Multimedia
Video playback:
Audio playback:
Picture view:
* STRONG cannot guarantee the playback of video les although extensions are listed, as it depends on codec used, data bit rate and resolution (all
MPEG codec formats are supported).
Connectors
RF IN - IEC Female
Auto Standby function enabled.
Read/write speed of your USB
device could be too low.
QSPK, 16/64/256 QAM
DVB-T2 (EN 302 755)
1K, 2K, 4K; 8K, 16 , 32 normal and extended
DVB-T2 = 1/128, 1/32, 1/16, 19/256, 1/8, 19/128, 1/4
MP@HL, MPEG-4 H.264/AVC
480i, 480p, 576i, 576p, 720p, 1080i, 1080p
PAL
4:3 Letterbox, 4:3 Pan & Scan, 16:9, Auto
MPEGI Layer I/II
32, 44.1, 48 KHz
Stereo, Mono
DVB-T2, UHF & VHF Tuner
DC 5 V, 50 mA, shortcut protected
174 – 230 MHz (VHF) and 470 - 862 MHz (UHF)
-20 ~ -82 dBm
4 MB
64 MB
AVI, MKV, TS, M2T, M2TS, MPEG-4 and MOV*
MP3 and OGG
BMP and JPEG
Disable auto standby. See section
7.3.7 for details.
Make sure to use a USB storage
device with su cient speed and
space. Pen drives ('USB sticks') may
not support su cient speed.
23