Info Banner; Selection Of Audio Language; Teletext; Subtitles - Strong SRT 8215 Installation Instructions Manual

Digital terrestrial hd receiver
Hide thumbs Also See for SRT 8215:
Table of Contents

Advertisement

6.1.2 TV list
Press OK in viewing mode to display the TV list. Use p q in the channel list to highlight your channel
of choice and press OK once to select the highlighted channel. Press OK again to leave the channel
list mode.
NOTE:
6.1.3 Using
 
p
q
p switches to the next channel.
q switches to the previous channel.

6.2 Info Banner

While watching TV, you can press INFO at any time to access information about the current channel
and event*.
Press INFO twice for technical details and signal level and quality.
*Event information is displayed when available. Availability depends on broadcast.

6.3 Selection of audio language

Some channels support a choice of audio formats and/or languages. To select another audio track,
press AUDIO in viewing mode. A list of available audio tracks will now be displayed. Use p q to
select a track and confirm with OK. The audio channel as stereo, mix, left and right can be selected
with t u.

6.4 Teletext

Your receiver includes a fully featured Teletext. To access Teletext, press TEXT in viewing mode and
use the 0~9 buttons to enter the number of the page you wish to see. Use p q to select one page
up or down, use t u to select subpages. Press

6.5 Subtitles

Some channels support a choice of subtitle languages. Press SUB in viewing mode to display a list of
available subtitle languages. Select your subtitle of choice with p q and press OK to confirm. Press
to leave without making changes.*
* Availability of DVB/Hard of Hearing subtitles depends on the broadcast. If subtitles are not present, then, they can be
activated via Teletext.

6.6 EPG (Electronic Programme Guide)

The Electronic Programme Guide is a very useful function that allows you to view event schedules
and programme information and to mark events/movies for wakeup of the receiver. To access the
EPG, press EPG in viewing mode. Use p q to select a channel and t u to select an event. Press OK
to display detailed information of the selected event. Use 9 to quit the detailed information screen.
Press the RED button to see and select another day or time. Press the GREEN button to set a timer for
a selected event. Refer to section 7.3.5 for details of the timer function.
Use t u to toggle between the All Channel list and the favourite list(s) or
press FAV in viewing mode for a list of available favourite lists.
or TEXT to get back to viewing mode.
9

Advertisement

Table of Contents
loading

Table of Contents