Info Banner; Selection Of Audio Language; Teletext - Strong SRT 7504 User Manual

6.1.2 Channel list
Press ok in viewing mode to display the Channel List. Use pq or P+/P- in the Channel List to highlight
your channel of choice and press ok to switch to the highlighted channel. The Channel List is equipped
with a filter function to make it easier to find your favourite channels. While in the Channel List, press
RED. An alphabet banner will now be displayed. Use pq or Ch+/Ch- to select the first letter of the
channel you wish to watch and press ok to confirm. All channels beginning with the chosen letter will
now be displayed (ascending order by channel number). The following buttons are available in the
Channel list and in viewing mode:
Tv/R:
LIsT:
fAv:
To return to the original channel list, go to the channel list and press Tv/R or LIsT.
6.1.3 Using the Ch+/Ch- buttons
Ch+ or UP will switch to a higher channel.
Ch- or q will switch a lower channel.

6.2 Info banner

Any time during viewing mode you can press the Info button to get info about the current channel
and programme*. Press Info twice to display detailed programme information of the current or next
programme. For the current programme information use tu to change between the current and next
event information. In the respective programme information you can use P+/P- to scroll if applicable.
If you press the button a third time, technical details of this channel will be displayed. The technical
information might help you in case of reception or similar problems to see if the channel provides
Audio/Video PIDs and if the signal is of sufficient quality and strength. Press Info or
information.During a recording the programme information with the recording progress banner can be
displayed by pressing the Info button. Just like at the normal information banner it is also possible to
switch between the current and next programme with the tu buttons. The recording progress banner
shows the elapsed and complete recording time. Settings for the display duration can be set in menu
7.1.3 system settings of the user manual on our website: www.strong.tv/downloads/manuals/7504_
UM_EN.pdf.If available the current parental rating can be found in the information banner as well.
*Programme information is displayed when available. Availability depends on the broadcast.

6.3 selection of audio language

Some channels support a choice of different audio formats and/or languages. To select another audio
stream, press AUDIo in the viewing mode. A list with the available audio languages will be displayed.
Press pq to select a audio language and confirm with ok. It is also possible to select another audio
mode with tu. When your settings have been made, press ok to apply.

6.4 Teletext

Your receiver includes a fully featured videotext. To access it, press the TEXT button in viewing mode
and enter the page number of choice with the 0~9 buttons. You can use pq tu like described on
screen for selection and scrolling through videotext pages. In this mode the usage of voL+/voL- and !
is supported as well. If subpages are available for the current page, open the page selection with the sUb
button. Enter the subpage with the 0 ~ 9 buttons and wait 3 sec. or press ok. Then select OK with pq
to confirm. As soon as the subpage is reached it will stay on screen, by repeating this procedure another
subpage can be reached as well. Of course, the above mentioned functions are still accessible. Press
to quit.
Toggles between TV and radio channels, in channel list changes the list mode.
Opens the satellite list selection in viewing and list mode.
Displays the favourite list selection in both modes.
to close the
13