Table of Contents
Advertisement
PaRT 1 • English
is possible. Just wait a few seconds and your receiver will switch to the selected channel or press Ok
immediately after selecting the channel number.
6.1.2 Channel list
Press Ok in viewing mode to display the Channel List. Use
channel of choice and press Ok once to select the highlighted channel. Press Ok again to leave the
channel list mode. Inside the channel list it is possible to use the PG+/PG- buttons as well in order to
scroll page-wise through the list.
TIP:
Use
tu
viewing mode for a list of available favourite lists.
6.1.3 Using the
buttons
pq
switches to the next channel.
p
switches to the previous channel.
q
6.2 Info banner
While watching TV you can press the INfO button at any time to access current information about the
channel and event*. Press INfO twice for extended EPG details about the current channel. Press INfO
three times for technical details about the current channel.
*Event information is displayed when available. Availability depends on broadcast.
6.3 Selection of audio language
Some channels support a choice of audio formats and/or languages. To select another audio stream,
press aUDIO in viewing mode. A list with available audio streams will now be displayed. Use
select the desired stream and confirm with Ok. The audio channel as stereo, mono, left and right can be
selected with the
buttons.
tu
6.4 Teletext
Your receiver includes a fully featured Teletext. To access Teletext, press the TTX button in viewing
mode and use the 0~9 buttons to input the number of the page you wish to see. The coloured buttons
of the remote control allow you to jump to selected pages directly, as indicated on the bottom of the
Teletext screen. Use the
Press EXIT or TTX to get back to viewing mode.
6.5 Subtitles
Some channels support a choice of subtitle languages. Press SUbTITlE in viewing mode to display a list
of available subtitle languages. Select your subtitle of choice with
EXIT to leave without making changes.*
* Availability of DVB/HoH subtitles depends on the broadcast. If such subtitles are not supported, then
most likely subtitles can be activated via Teletext if available.
6.6 Timeshift
Timeshift allows you to pause live broadcasts and resume playback later. To activate this function, set
the Timeshift mode in the DVR Setting menu to on by selecting Pause. For details, see 7.6.3. Press 2 in
viewing mode to activate Timeshift. The progress information banner appears on screen. Live TV keeps
playing for moment and will then pause. Press
live TV.
NOTE:
Timeshift and its playback only work properly when a fast USB storage device such
as a USB2.0 HDD is connected to the receiver. Timeshift and playback of HD content
requires sufficient read/write speed of the used USB storage device.
to toggle between the All Channel list and favourite list(s) or press fav in
buttons to select one page up or down, use
pq
u
in the channel list to highlight your
pq
tu
and press Ok to confirm. Press
pq
to resume Timeshifted playback. Press 3 to return to
to
pq
buttons to select subpages.
7
Advertisement
Table of Contents
