Info Banner; Selection Of Audio Language; Teletext - Strong SRT 8205 User Manual

Via direct access using the 0~9 buttons.

Via the channel list using OK

Via the  or CH+/CH buttons.

6.1.1 Direct access via 0~9 buttons
To gain direct access to a certain channel, simply input its number with the 0~9 buttons on the
remote control.
Channel numbers can be up to four digits long. Entering a number with less than four digits is
possible.
Just wait a few seconds and your receiver will switch to the selected channel or press OK immediately
after selecting the channel number.
6.1.2 Channel list
Press OK in viewing mode to display the Channel List.
Use  in the channel list to highlight your channel of choice and press OK once to select the
highlighted channel.
Press OK again to leave the channel list mode.
Inside the channel list it is possible to use the CH+/CH buttons as well in order to scroll page-wise
through the list.
TIP:
6.1.3 Using the

 or CH+ switches to the next channel.
 or CH switches to the previous channel.

6.2 Info Banner

While watching TV you can press the INFO button at any time to access current information about
the channel and event*.
Press INFO twice for extended EPG details about the current channel.
Press INFO three times for technical details about the current channel.
* Event information is displayed when available. Availability depends on the broadcast.

6.3 Selection of audio language

Some channels support a choice of audio formats and/or languages.
To select another audio stream, press AUDIO in viewing mode. A list with available audio streams will
now be displayed.
Use  to select a stream and con rm with OK.
The audio channel as stereo, mono, left and right can be selected with the   buttons.

6.4 Teletext

Your receiver includes a fully featured Teletext.
10
Use   to toggle between the All Channel list and favourite list(s) or press
FAV in viewing mode for a list of the available favourite lists.
or CH+/CH buttons