Printer Driver; Paper Size And Type Setting - Riso ComColor IS900C Instruction Manual

Paper size and type setting

For HC5500, you usually set up the tray selection by test mode 5-8-17, "size" or "size and paper type".
For ComColor, there are not any setting for tray selection such as HC. When customer select "Any" as paper type on
the driver, ComColor will select the tray depend on the only "size". On the other side, when customer select specific
paper type on the printer driver, paper type on the ComColor also needs match with printer driver setting.
As for ink drop amount, it will be decided depends on driver setting. So if customer send the data as matt coated paper
condition, ComColor will drop ink as matt setting even if normal paper is loaded. It is same as HC.
There is not "Any" on the
"Paper type menu"
51
There is a selection "Any" in
the menu. ("Any" is default)
Explanation

Printer driver