Double Feed - Riso ComColor IS900C Instruction Manual

X14-1102 (Double feed)
X14-1102-1: Double feed from the standard tray
X14-1102-2 : Double feed from the tray 1
X14-1102-3 : Double feed from the tray 2
X14-1102-4 : Double feed from the tray 3
Step1
Change the pad and holder to wide type
Old
13mm
14.5mm
When you have small pad and wider holder,
you can put it such as above photo.
050-65348-103 Holder (Wide)
050-65407-100 Stripper Pad (Wide type 14.5mm)
130
Step2
Adjust the pad angle from 4 to 3
New
Arrow mark
If you don't have a wide holder, you can
adjust to "5" or "6"
Step3
Adjust the height 1step lower
Scale
Maintenance
Paper Jam
Down