Riso ComColor IS900C Instruction Manual page 104

Ink drain down procedure for
13. Clamp the right side of ink drain tube and
then disconnect it from left pipe
Remove from
left pipe
17. Turn on the machine with cover open condition
18. Perform the test mode 2483
times
If you should drain ink for another colour, you
should use another test mode
Black: 2482
Cyan: 2483
Magenta: 2484
Yellow: 2485
After this test mode, ink supply tube will become
empty. Finally change the test mode
19. Shut down machine
You must open the front cover, otherwise ink
circulation will start
104
New ink tower
14. Insert the drain tube into the overflow pan
15. Remove the scissor
Clamp
(ink valve) with 20
20. Put back the drain tube to original position
2711 to 1
(For single tank replacement)
Insert
Drain tube
Page2
16. Open the front cover and remove ink
cartridge
21. Put back the drain tube to original position
Maintenance
Ink flow