Useful Test Modes (Setting Up) - Riso ComColor IS900C Instruction Manual

Useful test modes (Setting up)

Test mode No
716/717/718 IC CARD activate
726 USB port enable
727 IS900C enable
728/5715 Scanner enable
756 Count charge setting
1832 Paper jam recovery setting
1870 Maintenance power off selection
1878 Print Qty under 20 degree
1947/1948 Image mask adjustment
2701 BP power off position selection
7734/7780 CCD off mode setting
8400 Machine final registering
111
Name
You can enter each four digits KEY code
0: Off 1: On
0: Off 1: On
0: Off 1: On (728)
2: Type B
0: All paper remain 1: Auto ejection mode 2: Prevent to tear paper mode
You can keep the position for the BP and the maintenance unit
During the warming up, the machine can start printing
1947(F) 1948(R) Default is 5mm
When CCD mode is off, this values are used for image mask
You can stop the BP at packing position
7734: Standard paper 7780: Card
You can register the model ID into the machine at the installation
Maintenance
Test mode
Description
0: On 1: Off (5715)