Useful Test Modes (Maintenance) - Riso ComColor IS900C Instruction Manual

Useful test modes (Maintenance)

Test mode No
404/411 Maintenance print and NZL check
407 REv information save
409 Touch panel calibration
440/1497 Image adjustment parameter save
441/503 Image adjustment parameter retrieve
630 Error history display
1809 BP suction fan duty
1855 Face down ejection speed
1856 Face up side wing custom position
2405 BP unit move up
2407 BP unit move down
2428 Nozzle pressure - Print
2472/2477 C-MD recovery action
2606 Head temperature
2710 Ink temperature adjusting ON/OFF
2711 Head replacement mode
2712 Head adjustment print mode
2898 Head cleaning confirmation mode
2925/2926 Envelope image mask
2927/2928
7706/7711/7716 Paper slackness adjustment for trays (Long paper)
7743/7744/7745 Paper slackness adjustment for trays (Short paper)
112
Name
Paper feed from standard tray
You can save REv data into the USB memory
440: Copy to HDD 1497: Save as factory default
441: Retrieve from HDD data 503: Back to factory default
Old BP belt: 60 New BP belt: 100
0: Fastest 1: Faster 2: Standard
When you set it up, you can fix the wing position by pressing the "Jump wing
control "
You can make negative pressure on the head nozzle to fix MF
2472: You need some 330mm width paper 2477: Don't need any paper
You can see temperature of all print heads
If it is "1", the machine won't start ink warming up during the test mode
If it is "1", the machine will start ink filling after booting
If it is "1", you can adjust image position without horizontal transfer unit
You can see ink dripping down from the head during the cleaning
Default is 90 (9mm)
7706(Tray1) 7711(Tray2) 7716(Tray3)
7743(Tray1) 7744(Tray2) 7745(Tray3)
Maintenance
Test mode
Description