Lost The Admin Ic Card - Riso ComColor IS900C Instruction Manual

Lost the Admin IC card

If customer lost the Admin IC card, basically you can change Admin IC card using following procedure.
When the firmware version is Ver10.16 or before
1. Retrieve the user setting CSV file via RISO Console
2. Change one of the user authority from "user" to "Admin" on the CSV file
3. Overwrite this revised CSV file via RISO Console
4. Login Admin mode using this revised new Admin authority user
5. Prepare the brand new IC card, you can register this card for original Admin user.
6. Switch back the another Admin authority user to normal "user"
When the firmware version is Ver11.16 or later, typing pass word is NOT registered
Procedure is same as above
When the firmware version is Ver11.16 or later, typing pass word is also already registered
There in no way to recover this, you just clear all of Admin settings using 504 and 510. After that you register all of
users, network settings etc.
22
Function
User setting