CE34/44/54 Pilot menu & navigation examples
5.10 Anchor guard
GOTO
Call up the GOTO menu, and...
activate the anchor guard function
5
-the chart display will provide an impression of the vessel's position
in relation to the alarm circle.
To check/change the preset alarm distance:
MENU
Call up the menu bar, and...
load the highway display
3,1
Enter the navigation setup display
ADJ
Key in a new value with numeric keys
0-9
Confirm the change
ENT
To turn Anchor guard off again:
GOTO
Call up the GOTO menu, and...
turn anchor guard off
3
5.11 MOB alarm and navigation
The MOB - Man overboard - alarm and display will be activated if
you press the [MOB] key on the CEXX keypad and hold it depressed
for two seconds, or activate an external MOB switch (hold five sec-
onds) and then press the [ENT] key to start MOB navigation.
The MOB display will provide all relevant data for an efficient
rescue operation - refer to details on the rear of the first page of the
manual.
To turn the MOB function off again:
GOTO
Call up the GOTO menu, and...
turn the MOB function off
3
To check the last activated MOB position:
MENU
Call up the menu bar, and...
select MOB data
5,7
Chapter 5-19