Table of Contents
Advertisement
Chapter 8-4
CE34/44/54 Setup menu
Select new values by means of the +/- keys
+/-
Confirm changes, or...
ENT
Abandon changes and exit display
MENU
Transducer - select transducer type. Insert the depth (position) of
the transducer below surface.
Display can show: DEPTH BELOW KEEL / SURFACE / TRANSDUCER
Data on NMEA-out from - select the frequency you wish to use for
transfer of data to connected navigator, plotter, etc.
Alarm for fish - set the strength from min. 000 (weak echo) to max.
099% (strong echo), and you can set it ON or OFF.
Depth DS fish - define a specific area below the water surface of
minimum and maximum depth for the fish alarm.
Depth DK alarm min. and max. - set up a depth limit alarm for
depth below keel.
Water profile - choose between SALT and FRESH water. The set-
ting will reflect on the:
Velocity of sound in water: SALT = 1470 meters per second and
FRESH = 1430 meters per second as standard. The standard set-
tings can be even more accurate by slightly increasing the number of
meters in warm waters and decreasing in cold waters.
Time/distance scale - will indicate the elapsed time or distance for
the echo picture. The readout will appear in the upper part of the
echo display. Toggle between time and distance in "Scroll synchro-
nisation", section 4.7.
Restart of AUTO pulse/power - will automatically restart the
echosounder if bottom detection has been lost for the chosen time
interval i.e. 10, 20 or 40 seconds. The AUTO pulse and power will
restart from 10W and SHORT pulse.
Echo sampling - is preset to BOTTOM, which enables auto range
and a view all the way to the bottom. For vessels moving at high
Hide quick links:
Advertisement
Table of Contents
