Simrad CE34 ChartSounder Manual page 128

Chapter 8-8 CE34/44/54 Setup menu
adjusted in Pilot/Position setup, press [MENU], [6], [PILOT], and
use the cursor key to go to "Speed and course filter level" to adjust
the setting, confirm with [ENT].
Press [CLR] to reset an alarm - this applies to all activated alarms in
the system.
Depth / altitude in - can be set to meters (m), feet (ft) or fathoms (fm).
Distance in - can be calculated in nautical miles (nm), kilometers
(km) or statue miles (mi).
Speed in - can be shown in knots (kn), kilometers/hour (kh) or
miles/hour (mh).
Temperature in - can be shown in Celcius or Fahrenheit.
Software version - indicates which software version is installed in
the unit.
TL50 version (CE44/54) - indicates if a TL50 Turbo Loader is con-
nected and which software version is implemented.
AT44 version (CE44/54) - indicates if an AT44 SimNet converter is
connected and which revision hardware and software is implemented.
Serial number (CE34) - indicates the unit's internal serial number.
Interface software version (CE34) - indicates which version is
installed in the CE34 unit (for technicians only).
GPS receiver type - indicates which type is installed in the unit (for
technicians only).
PAGE rotation interval - can be set to anywhere between 03 to 99
seconds. Refer to "Fundamentals of the display and page system" in
section 2.1 for more details on how the function works.
Display text in - as standard the CEXX is supplied with the follow-
ing national display languages: Danish (DK), English* (GB) and
(US), French (F), German (D), Italian (I), Dutch(NL), Spanish (E),
Swedish (S), and Portuguese (P).
*) The difference from GB English to US English is: Celcius is
changed to Fahrenheit, meters is changed to feet, and the date pres-
entation is changed from dd.mm.yy to mm.dd.yy.