Simrad CE34 ChartSounder Manual page 46

Chapter 3-20
Group: Areas - defines the presentation of different areas on chart.
The default settings in this group are the same for all display modes, except
GRID, which do not include C-MAP features. The features can be changed
from FILLED to CONTOUR:
C-MAP features
Land areas
Depth areas
Caution areas
Dredged areas
Group: User data - user defined objects can be visible or invisible on chart.
The default settings in this group are the same for all display modes and any
change of the default settings will be applied in all display modes.
Chart features
Waypoints
Non active waypoints
Waypoint names
Waypoint depths
Routes
Non active routes AS SELECTED
Route names
Tracks
Non active tracks AS SELECTED
Track names
Lines
Lines
Line names
Targets
Targets
Target names
CE34/44/54 Chart menu and INFO windows
All display modes
FILLED
FILLED
FILLED
FILLED
ON
ON
ON
ON
ON
AS SELECTED
ON
AS SELECTED
ON
Defaults and choice of settings
All the features in the user data
that are set as default to ON= shown
on chart, can be changed to OFF= not
shown on chart.
Non active routes and tracks, all lines
and all targets are default to:
AS SELECTED= the choices made
for a particular route etc via the menu
e.g. MENU, 5, 2, ENT, ENT - Edit
route, where 'Course line' can be set
ON or OFF.
'AS SELECTED' can also be changed
to 'ALL ON'= shown on the chart,
or 'ALL OFF'= not shown on the
chart.