Factory Settings - Simrad CE34 ChartSounder Manual

Chapter 8-22
Key in a name for the new palette setup - max. 29 characters,
A-Z
-refer to "Naming of routes, points, etc." in section 2.6.
Toggle between available color settings
+/-
Confirm new setup
ENT

8.7 Factory settings

DELETE MEMORY: It will be possible to erase a single category
of objects entered into the unit by the user - for example, if moving
to a different place in the world you may no longer need the routes
etc. you have in the memory. However, an alternative is to store the
data on a DataCard or disc - refer to section 7.9.
FACTORY PRESETS: If the unit is still 'alive' but has ceased to
respond to normal operation, it could become necessary to return to
the factory presets - but first check 'Troubleshooting' in section 9.1.
MENU
Call up the menu bar, and...
activate the display for Factory settings
6,4
1
2
3
4
5
Used memory:
6
7
8
CLR
0
MENU
DELETE MEMORY:
Delete all WAYPOINTS
Delete all ROUTES
Delete all LINES
Delete all TRACKS
Delete all TARGETS
FACTORY PRESETS:
Return to SimNet/NMEA presets
Return to CHART presets
Return to SOUNDER presets
Return to all factory presets
Show test display
Exit
CE34/44/54 Setup menu
0%