Data Transfer Via Pc Interface - Simrad CE34 ChartSounder Manual

Chapter 7-20

7.10 Data transfer via PC interface

Data transfer to and from a route planning program on a Personal
Computer can be made via NMEA connection (Refer to Optional
connections in the Installation manual) by means of the standard
NMEA0183 sentences WPL and RTE.
The data transfer on these two sentences does not include WP sym-
bol, color, XTE limit, etc.
PC-based planning systems differ in operation and performance
beyond the control of Simrad.
MENU
Call up the menu bar, and...
load the Data transfer window
5,8
1
3
7
MENU
Select the NMEA connection
7
CE44/54 example:
Normal NMEA communication on
selected channel will be
1
NMEA 1
3
NMEA 2
MENU
Press [1] or [3] to select the NMEA port where the PC data cable is
connected. This will activate a new window, see next page.
Data transfer
DataCard upper drawer
DataCard lower drawer
NMEA connection
Exit
WARNING!
interrupted.
Exit
CE34/44/54 Waypoint / route menu
- see section 7.9
- see section 7.9
The normal communica-
tion via this NMEA port
is temporarily abrupted
during the time of data
transfer.