Cursor Placed On Trackpoint - Simrad CE34 ChartSounder Manual

Chapter 3-12

3.4.6 Cursor placed on trackpoint

Trackpoints are not as easily recognized as Routepoints, you may
have to move the cursor along on the track to locate a trackpoint.
With chart in active window, and cursor placed on a trackpoint,
ENT
press [ENT] to call up the quick menu with the following to choose
from:
Trackpoint found
Name: TRACK 1
Total:
1
2
3
4
5
0
PAGE
MENU
1
Edit user data opens a new info window:
CLR
1
2
3
MENU
Press [1] to delete points from A to B - move cursor to point B, and
press [ENT] to delete all trackpoints between cursor position on
chart and point B.
More user data if cursor is placed on a MOB track you can toggle
PAGE
between data on MOB symbol and data on MOB track. The symbol
and track are edited separately.
CE34/44/54 Chart menu and INFO windows
836 points
Edit user data
Chart info
Find nearest port services
Bearing and dist from A to B Refer to section 3.4.2
Lock cursors
Cursor to center
More user data
Exit
Trackpoint
Delete point
Delete points from A to B See below
Edit
Delete
Exit
3
Refer to Appendix C
Refer to Appendix C
Refer to section 3.4.2
Refer to section 3.4.2
Exit info window
Delete trackpoint
Open new info window
Delete the whole track
Exit info window