Simrad CE34 ChartSounder Manual page 131

CE34/44/54 Setup menu
Group selection can be set to:
SIMRAD - auto-selected SimNet units from the Simrad group.
STAND-ALONE - manually selected data source and third party units.
Source: - depending on which products (sources) are connected, the
legend will indicate: 'none available', 'one available', 'multiple avail-
able' or 'owned, data type locked'.
PLOT
Go to Position interface - step back with [GOTO]
◄
GOTO
Input:
Group selection:
Source (one available):
Position mode:
External DGPS mode:
Datum: 000-World Geodetic System1984
Dead reckoning speed:
NMEA0183 output:
GPS fix data:
GNSS fix data:
Geographic pos, Lat/Lon:
Recom. min. GPS data:
Track made good & SOG:
Time and date:
MENU
Position mode:
INTERNAL - the applied position is compiled by the in-built GPS
receiver.
EXTERNAL - the applied position is compiled by an external unit.
DEAD RECKONING - will allow the system to function as a Navi-
gation simulator, which can be used for demonstration purpose or
for practicing 'live' navigation in 'off season'. If you wish to change
the preset speed (10 kn), refer to description next page. Navigation
to cursor or waypoint, in route or in track is started as described in
Nodes
Position
Simrad CE34-1
Exit
PLOT
Navigation
SIMRAD
,Sn:100003
INTERNAL
OFF
010.0kn
GGA
GNS OFF
GLL OFF
RMC
VTG
ZDA OFF
Accept
Chapter 8-11
►
∆
ON
ON
ON
ENT