Choice Of Symbols; Naming Of Routes, Points Etc; Initial Start-Up - Simrad CE34 ChartSounder Manual

CE34/44/54 Fundamentals & initial start-up

2.5 Choice of symbols

Waypoints and other points appearing on the screen can be marked by one of
18 symbols + 8 event marks in small or large symbols:

2.6 Naming of routes, points etc.

First select the key with the desired letter, then you can either repeat the
keystrokes, which will toggle between e.g. A,B,C,1, or once you have selected
one letter you can go back and forth in the alphabet by means of the +/- keys.
Use the cursor key to go to next space or to go back one space if you make a
mistake.
Depending on the selected language, the 0 (zero) key will hold special charac-
ters e.g. Æ Ø Å Ä Ö Ü Ñ, and the 9 (nine) key will hold: . - (empty space)
Press the [CLR] key to delete everything from cursor position and to the right
of cursor in that row.

2.7 Initial start-up

When starting up for the very first time, the first time after loading
a new software or after a master reset: Make sure that all hardware
installation and electrical connections are completed in accordance
to the installation instructions.
Press and hold the [PWR] key until you have a picture on the screen
PWR
The system will perform a software update and when finished, a
new start-up window will be presented on the screen (see example
on next page).
Chapter 2-7