Ship Symbol; Cursor Function - Simrad CE34 ChartSounder Manual

CE34/44/54 Chart menu and INFO windows
long, compass and depth indication, bearing and distance to either approach-
ing point or cursor position; together with time and date in local or UTC.
*)Refer to section 5.3 Status indicator and accuracy.

3.1.2 Ship symbol

The ship symbol indicates the present position on the chart and the
vector informs of the actual heading (input from compass) or true
course (course over ground). There is a built-in autohome function
which automatically moves the chart to maintain the ship symbol in
the display (with cursor off).
Press [0] to instantly center the ship on the chart (with cursor off).
0 ***

3.1.3 Cursor function

With chart display active:
Press the cursor key to activate the chart cursor (cross hairs)
Press [CLR] to turn the chart cursor off
CLR
As default (section 3.5 Chart setup under General), the chart cursor
will automatically switch off if not used in the last five minutes. The
chart will update and bring the ship's position to the center of the
screen.
Use the cursor key to move cursor in any direction on the screen
- the chart will automatically adjust when cursor reaches the edge of
the screen.
Press [0] to instantly center the cursor on the chart (with cursor on).
0 ***
In data displays the cursor will be shown in form of either a ruling
box around the active field, or the active field will be highlighted.
Chapter 3-3