Officeserv - Samsung OfficeServ 7100 Installation Manual

OfficeServ 7100

TECHNICAL MANUAL
2.5.2 Wall Installation
CAUTION: Only mount OfficeServ 7100 onto a wall capable of supporting the 7100
cabinet, associated blocks, cables and peripheral equipment.
1) There are four holes for the screws on the top/bottom of the bracket (see positions
marked 'A' in the figure below). Mark four holes on a desired wall by using the bracket.
2) Make holes on the marked positions of the wall mount bracket. Make the depths and the
diameters of the holes more than 35mm and around 5.5mm such that the plastic anchors
can be inserted.
A
A
Figure 2.13 Installation on a Wall (1)
Figure 2.14 Installation on a Wall (2)
2.9
Home Page Table of Contents
INSTALLATION
PART 2 MAY 2010