Samsung OfficeServ 7100 Installation Manual page 46

OfficeServ 7100
TECHNICAL MANUAL
Ports & LEDs Function Description
CLK LED This LED indicates whether this card is a master or slave.
- On: The card has received the synchronization clock from the counterpart station.
- Off: Using synchronous clock for internal clock.
TP1 LED This LED indicates whether the T1 is established.
- This LED turns on once the T1 is established. (T1 is not supported)
TP2 LED This LED indicates whether the PRI is connected.
- This LED turns on once the PRI is connected. (T1 is not supported)
Refer to Section 6.2.2 for Port Pinout and Wiring.
3.5.2 8TRK
The 8TRK card provides 8 ports for analog trunk lines with Caller ID capabilities. This card can go
into any universal slot (1~2). Add as many as needed.
FRONT VIEW OF 8TRK
The front view of the 8TRK card is shown in the picture below.
Figure 3.22 Front View of the 8TRK
3.25
Home Page Table of Contents
INSTALLATION
PART 3 MAY 2010