Samsung OfficeServ 7100 Installation Manual page 92

OfficeServ 7100
TECHNICAL MANUAL
MP10/MP10a Reset
New settings are applied only after the card is reset. The system may malfunction if
the card is not properly initialized.
INSTALLATION TOOL AND LAN CONNECTION
1. Execute OIT.
2. Click [System] -> [Link Control] menu to set the communications link.
3. Enter System name (e.g. ABC Company).
4. Select the <link type> (e.g. LAN).
5. Input the IP address (e.g. 192.169.9.209).
6. Click [Apply].
7. Dialog box shows: "Do you want to apply new setting value?"
8. Click [Yes].
9. Dialog box shows: "The new setting value is applied."
10. Click [OK]. Click [Close].
11. Click [System]. Click [Connect].
12. Enter Password [Samsung], then [OK].
Figure 7.25 OIT and LAN Connection
7.28
Home Page Table of Contents
INSTALLATION
PART 7 MAY 2010