Samsung OfficeServ 7100 Installation Manual page 81

OfficeServ 7100
TECHNICAL MANUAL
SETTING-UP SMT-i5264 AOM
SMT-i5264 AOM will register to the OfficeServ system as an IP phone device. It need the IP
phone ID and password during the registration. The SMT-i5264 will receive an IP phone
extension. It can be paired to any IP phone or digital phone as the add-on module. MMC 209
is used to pair the AOM extension to a master phone.
• Prepare AOM to the set up mode
o Press and hold 2
mode.
o Press the 3
rd
o (Press the 2
rd
will default the AOM to the factory settings.)
• Two methods to set up the AOM
o Use SMT-i5243 phone to set up the AOM.
 Enter SMT-i5243 phone to the engineering mode
• Menu -> phone -> phone information -> *153#
• Select Network -> AOM to enter into the set up mode
• Enter the following data
Figure 7.18 Setting-Up SMT-i5264 AOM
key from the 1 column (left most columns) to enter the set up
nd st
key from the 4 column (right most columns) after this key is flashing.
th
key from the 4 column (right most columns) after this key is flashing
th
o If IP setting is DHCP skip this step
 IP address: (assign an AOM IP address)
 Gateway: (from MMC 830)
 Subnet Mask: (from MMC 830)
7.17
Home Page Table of Contents
INSTALLATION
PART 7 MAY 2010