Samsung OfficeServ 7100 Installation Manual page 69

OfficeServ 7100
TECHNICAL MANUAL
CONNECTING TO 16DLI2
Connect a digital phone to the 16DLI2 card by using a twisted pair of AWG #24 or AWG #26 wires.
P1-P16 Ports
Pin No. 1
Function -
CONNECTING TO 8COMBO/8COMBO2
Connect a digital phone to the 8COMBO/8COMBO2 card by using a twisted pair of AWG #24 or
AWG #26 wires.
D1-D8 Ports
Pin No.
Function
7.1.4 Connecting an IP Phone
Refer to the ITP-5121D Keyset User Guide, ITP-5112L Keyset User Guide, ITP-5107S Keyset User
Guide, SMT-i3105 User Guide, SMT-i5210 User Guide, SMT-i5220 User Guide, SMT-i5230 User
Guide, and SMT-i5243 User Guide for information on connecting IP keysets.
Note: If using the on-board MGI resources of the MP10/MP10a, you must activate the MGI
license key in system programming to enable the specific number of MGI channels.
CAUTION: The input power of the SMT-i Series phones needs 5.0vDC and 3000mA. The
SMT-i5210, SMT-i5220, SMT-i5230, and SMT-i5243 need to be powered by using
Samsung's SMT-A53PW power adapter. The SMT-i3105 requires the SMT-A53PA power
adapter. Failure to use the appropriate power supply will cause permanent damage to
the phone and will void Samsung's warranty.
2 3 4
- - DLI TIP
Figure 7.7 RJ-45 Port of the 16DLI2 (For Digital Phone)
1 2 3
- - - DLI TIP
Figure 7.8 RJ-45 Port of the 8COMBO/8COMBO2 (For Digital Phone)
7.5
Home Page
P1-P16
Port
(RJ-45)
5 6
DLI RING -
D1~D8
Port
(RJ-45)
4 5 6
DLI RING -
Table of Contents
INSTALLATION
PART 7 JULY 2010
7 8
- -
7 8
- -