Table 3.3A Ports And Leds Of The Mp10 - Samsung OfficeServ 7100 Installation Manual

OfficeServ 7100
TECHNICAL MANUAL
3.2.4a MP10 LEDs
The front view of the MP10 card is shown in the picture below.
The MP10 front panel components have the functions below:
Ports & LEDs
P1~P4 Ports
MISC Port
Media Card
LAN Port
SIO Port
RST Button
RUN LED
LAN LED
Figure 3.7a Front View of the MP10

Table 3.3a Ports and LEDs of the MP10

Function Description
Connection ports for the 4DLM or 4SWM daughtercards when installed
on the MP10.
Port that connects external MOH/BGM sources, paging device, loud bell
or common bell.
Slot for installing the MP10 MMC+/SD media storage card. This card
contains the main system software, system configuration database, and
voicemail greetings and messages.
Port for establishing the 10 Base-T/100 Base-Tx Ethernet connection.
This allows the MP10 to be connected to a data network.
Serial port (Samsung Use ONLY).
Button for resetting the MP10 card.
This LED indicates the status of the main CPU operation.
- Off: Power is not connected.
- On (Green): Booting, reset.
- Blink (Green): The program is operating properly.
This LED indicates the status of the connection to LAN.
- Off: MP10 is not connected to LAN.
- On (Green): MP10 is connected LAN.
- Blink (Green): MP10 is transmitting or receiving data through LAN port.
3.9
Home Page Table of Contents
INSTALLATION
PART 3 MAY 2010