Home Page
Table of Contents
OfficeServ 7100
INSTALLATION
TECHNICAL MANUAL
PART 2 MAY 2010
2.3.2 Required Tools
• A mid-sized Phillips screwdriver
• Two brackets and six screws for attaching rack
• Two clamp screws
Figure 2.1 Tools Required for Rack Installation
2.3.3 Installing in a Rack
The procedure for installing the OfficeServ 7100 cabinet inside a 19-inch rack is as follows
(NOTE: The optional rack mount kit is required for this method. This kit is sold separately):
1) Attach the cabinet bracket to the bottom surface of the OfficeServ 7100 cabinet and fasten
the bracket firmly with the two screws.
Figure 2.2 Rack Installation (1)
2.2