Table 3.12 Mgi16 Front Panel Components - Samsung OfficeServ 7100 Installation Manual

OfficeServ 7100
TECHNICAL MANUAL
Ports & LEDs
LAN
SIO
RST
PWR LED
RUN LED
LAN Tx LED
LAN Rx LED
SVC LED
DSP LED
RTPT LED
RTPR LED
3.5.11 OAS (OPTIONAL APPLICATION SERVICES)
The OAS card is a lower-cost alternative to the MGI-16 card, and provides all the same
functionality and capacities as an MGI-16 in OfficeServ 7100 systems. The MGI channels can
be configured in MMC 831 and MMC 835.
SPECIFICATIONS
• The OAS card can be installed in slots 1 or 2 if the OfficeServ 7100.
• Only one (1) OAS card can be installed in the OfficeServ 7100.
• The MOBEX DSP and MPS channel features of the OAS card are not available on the
OfficeServ 7100 as these features are embedded on the MP10/MP10a processor card.

Table 3.12 MGI16 Front Panel Components

Function Description
Port that connects the Ethernet.
Serial Port (for Samsung Use ONLY)
Button for resetting the MGI.
This LED indicates the power supply status.
- Off: Power is not being supplied.
- On: Power is being supplied properly.
This LED indicates MP10/MP10a status.
- Off: Power is not being supplied.
- On: Booting.
- Blink: The RAM program is operating.
This LED indicates the transmit status of the LAN port.
- Off: Data is not being transmitted.
- On or blink: Data is being transmitted.
This LED indicates the receive status of the LAN port.
- Off: Data is not being received.
- On or blink: Data is being received.
This LED indicates if the service is being offered.
- This LED blinks when program is being modified or configuration is being
loaded.
This LED indicates if the VoIP DSP is operating.
- This LED blinks when the VoIP channels are engaged.
This LED indicates if the voice packets are being forwarded.
- This LED turns on when the voice packets are forwarded.
This LED indicates if the voice packets are being received.
- This LED turns on when the voice packets are received.
3.34
Home Page Table of Contents
INSTALLATION
PART 3 MAY 2010