Samsung OfficeServ 7100 Installation Manual page 77

OfficeServ 7100
TECHNICAL MANUAL
2. Remove the cradle of the phone by pressing
the [Push] mark on the top of the cradle to
push it out
3. Use screw holes 1 and 2 to attach the base
wedge to a standard electrical outlet box.
7.1.9 Attaching Add-On Modules (AOMs) to Keysets
TDM 64 Button AOM
IP 64 Button AOM
ATTACHING iDCS 64 BUTTON MODULES TO AN iDCS KEYSET
First, remove the base wedge from the iDCS 64 button module and attach the bracket to it
with two of the screws provided
Remove the base wedge of the keyset and place it to the right of the 64 button module and
attach the bracket/64 button module to the keyset with the remaining two screws.
The base wedge can now be replaced.
NOTE: If you wish to attach two 64 button modules to a keyset, connect the 64 button
module together first and then attach them to the keyset.
MAXIMUM AOM CAPACITIES
Maximum per Station
2
2
(see Figure 7.14).
7.13
Home Page
PART 7 MAY 2010
Maximum per System
Limited by available DLI ports
Limited by available IP/Virtual Ports
Table of Contents
INSTALLATION