Table of Contents
Advertisement
1-12
20. INSTRUMENT PANEL CONTROLS
Check the operation of the following
1. Horn
2. Headlamps
3. Exterior and interior lamps
4. Instrument panel lamps
5. Instrument brightness control
21. METERS, GAUGES, WARNING
LAMPS AND INDICATION LAMPS
1. Check the meters and gauges are functioning
properly.
2. Check each indicator lamp and warning lamp
functions properly.
22. AIR CONDITIONER, HEATER AND
DEFROSTER SYSTEM
Check the systems for proper operation.
1. Air conditioner
(1) Operate the air conditioner system.
(2) Operate the air conditioner light.
(3) Operate the control lever in all ranges.
(4) Operate the blower motor switch in all ranges.
PRE-DELIVERY INSPECTION
BEFORE ROAD TEST
M6010700400083
2. Heater and defroster
M6010700500024
A: From front and side defroster
B: From centre ventilators
C: From side ventilators
D: From under the instrument panel
E: From under the front seat (some models only)
AC305624
23. WIPERS AND WASHERS
M6010700600021
1. Front wiper and washer
AC305625
2. Rear wiper and washer
(1) After the engine has warmed up, turn on the
heater.
(2) Operate the blower motor switch in all ranges.
(3) Move the control to "Defrost" position.
(1) Check operation of the front wipers in all
ranges.
(2) Check the aim of the front washer stream.
(3) Check the wiper blade-stop positions.
(4) Verify that the interval between cycles of
wiping is shifted when timer knob is turned to
any position.
(5) Verify that the front wipers function by
operating the washer switch.
(1) Check the operation of the rear wiper.
(2) Check the aim of the rear washer stream.
(3) Check the wiper blade-stop positions.
AC305626
M6010700700028
AC305627
Advertisement
Chapters
Table of Contents
